| EQUIPMENT |
Print Engine: |
Inca FastJet™ Printer, 1040mm width, CMYK + Varnish |
Feeder: |
Sun Automation |
Flexo Print Station: |
Sun Automation |
UV Curing System: |
Nordson, nitrogen blanket, 4 lamps |
Printing Speed: |
Up to 100m/minute |
Sheet Sizes: |
Max 120cm x 170cm, min 40cm x 60cm (short edge leading) |
Sheet Thickness Range: |
1.5mm – 9mm |
|
SOFTWARE |
Data Processing Hardware Microsoft Windows based processing cluster, 6 AMD Opteron CPUs, 12 GB RAM, Gigabit Ethernet |
Data Processing Throughput: up to 800million drops per second (sustained) |
| Ready-to-run job capacity (typical): 400 jobs, upgrade options to 4800 jobs |
Job Format: |
.PNG preview thumbnails |
Separated: |
.TIFF |
RIP: |
Microsoft Windows based Wasatch Soft RIP v5 (Inca Edition), Gigabit Ethernet capable (depending on site IT infrastructure) |
| |
PRINT QUALITY |
Resolution: |
300dpi in cross direction, approx. 200dpi in machine direction (selectable) |
Visual Quality: |
As per samples provided, but n.b. dependent on substrate |
Downtime: |
To be confirmed by testing of beta machines, but availability assumed ~80%. |
|
SERVICES |
Training: |
Pre-press studio staff (origination, RIP etc.), machine operator |
Installation |
Site survey, transport to site, integration, commissioning |
Technical Support Y1: |
Service engineer on-site within 24 hours of call but within normal working week |
Technical Support Y2: |
Annual support contracts with various terms |
|
PRIMER AND INKS |
Mitras™ Primer from SunJet® |
|
Mitras™ UV-R from SunJet® |
|
Declaration of Conformity provided |
|
| |
| ECONOMICS |
| Based on the FastJet™ Cost Model, the customer will establish together with Sun Chemical Digital a calculation to identify the degree to which FastJet™ cost assumptions can be confirmed by experience. |
| |
| REQUIRED PERIPHERALS |
Space (m) |
9,5 (l) x 5,8 (w) x 2,6 (h) includes cabinets but not pre-feeder or stacker. A total production space of 10m x 25m is recommended. |
Statics: |
Weight of the machine approx. 6t |
Power: |
350A / phase 415V |
Water: |
Closed system |
N2: |
1800l / min. |
Air: |
6 bar, clean and dry |
| |
|
| REQUIRED TRAINING |
Machine operator training: |
2 days training at Inca, one week (part time) during commissioning |
RIP Training: |
2 days during commissioning (assumes basic RIP skills) |
Advanced Operator Training |
Two weeks on site |
| |
|
* Data subject to change without notice |
